Skip to content
Free standard shipping 🚚 from € 99.00 into UE
by minileiste

minileiste UL20X5 transition profile, 20x6x2000mm

-5%
€23,74 €24,99
€11,87/m
Tax included. Shipping calculated at checkout.
SKU: UL20X5-01

Available immediately

✔ Dimensions: 20 x 6 x 2000mm
✔ Quick and easy clip assembly
✔ Made in Austria

Select Color

Transition profile for floor thicknesses from 5 mm. Transition joint 5 - 13 mm.

 

mini bar UL20X5

The transition profile UL20X5 creates a discreet and innovative transition of same level floorings - wherever connection and expansion joints have to be maintained in terms of construction efforts.

Suitable for: Parquet, laminate, design floors and tiles

100% aluminum. Surfaces elegantly anodized (silver, titanium, black, gold) or high-quality powder-coated (white)

Individual profile bars, each 200 cm long. The profiles are simply pieced together and the corners are mitered.

CLIP5 type mounting clips and MH100 mounting aid

Order free samples now

0 / 0

Tool-free, quick and easy

The transition profiles from minileiste can be installed easily , without tools and without visible fastening points: no drilling, no screwing, no hammering, no dirt, no noise, no annoyance. Irregularities in the floor can be easily compensated for by simply attaching additional mounting clips if necessary.

Step 1

The width of the connection joint should be between 5 and 12 mm. The thickness of the flooring must also be taken into account. Type X5 systems can be used with a minimum floor covering thickness of 5 mm.

Step 2

The dimensions for the profile cuts are taken from the floor covering.
Any mitre cuts are taken into account.

Step 3

The profiles are cut to length. The profile is securely positioned in the cutting aid. This prevents the profile from jamming during the cutting process.

Step 4

The mounting clips are pushed into the transition profile on the front. Attention: Two opposite shoulders are worked into the transition profile, between which the mounting clips are easily guided.

Step 5

Insert mounting clips every 30 cm in the end strip.
ONLY FOR FLOATING FLOORS: Before installing the profiles, apply some flexible installation adhesive or silicone into the end joint to fix the profile securely.

Step 6

The transition profile with the inserted mounting clips is now brought into the mounting position on the transition joint. With the assembly aid, the assembly clips are carefully spreaded out by using the assembly aid to apply the assembly clips towards the transition profile.

Step 7

As soon as the clamping process is completed, the end profile is pressed down and the assembly aid is removed. Now the tensioning and assembly process is repeated until all assembly clips on an transition profile are tensioned and countersunk. For any corrections the transition profile can be removed from the connection joint at any time.

Step 8

The transition profile is installed. After a brief inspection, the next section can be assembled.